Personnel Requirements Under Washington State’s Updated Construction Crane Rule
Washington State’s new regulation for cranes and derricks in construction was released on August 5, 2025 and goes into effect on September 5, 2025. The rule had been in development since 2018 and included a number of stakeholder meetings from August 2023 through to April 2024 with public hearings held in May 2025.
The rule has a number of areas that are addressed, but for the purposes of this article, we wanted to focus on the impacts to the Personnel Requirements. Washington State has required certification of crane operators in the construction industry since 2010, however, the new rule establishes many new personnel requirements beginning September 5th, 2025, unless otherwise noted.
For equipment operators working under 296-155 WAC, Part L, Washington State updated their requirements to align with OSHA 1926. Specifically, operators are required to be certified by an accredited nationally recognized certification body through a written and practical exam. CCO Certification Operator Certifications meet this requirement. Additionally, the operator needs to meet the hours of experience in “Table 3”, which goes up to 1,000 hours, and pass a substance abuse test. Similar to OSHA, the operator must also be evaluated by the employer to ensure the operator is qualified by demonstrating skills, knowledge, ability to recognize and avert risk as well as to operate the equipment safely. WAC 296-155-53300
For many of the other positions on a construction site, Washington State outlined a specific qualification process as either: (1) Third-party qualified evaluator, wherein the individuals receives documentation from a third-party qualified evaluator showing that the individual meets the requirements; or (2) The employer utilizes their own qualified evaluator to determine if the individual meets the requirements. In all cases, the employer’s own qualified evaluation is not portable to other employers. Lastly, if there are actions taken by the individual that may not meet the qualification requirements, the individual needs to be retrained and reassessed.
Lift Directors working under 296-155 WAC, Part L follow the above stated qualification process as stated under WAC 196-155-53301. CCO Certifications Lift Director Certification meets this requirement. To be qualified, the Lift Director is required to take a written or oral test, be a current qualified rigger, and be a current qualified signal person. The qualification period is only valid for a maximum period of 5 years. This requirement goes into effect on September 5th, 2025.
Signal Person qualifications under this standard are also similar to the qualification process outlined above as stated in WAC 296-155-53302. CCO Certifications Signal Person Certification meets this requirement. To be qualified, the signal person is required to take a written or oral test as well as a practical test. The qualification period is only valid for a maximum period of 5 years. This requirement goes into effect on September 5th, 2025.
Rigger qualifications under this standard also follow the qualification process outlined above as stated in WAC 296-155-53303. CCO Certifications Rigger I Certification meets this requirement. To be qualified, the rigger needs to take a written and practical test. The qualification period is only valid for a maximum period of 5 years. This requirement goes into effect on September 5th, 2025.
For Assembly/Disassembly Directors, qualifications under this standard also follow the qualification process outlined above as stated in WAC 296-155-53303. To be qualified, the A/D Director needs to take a written or oral test. Effective beginning January 1, 2027, or 12 months after the date of an applicable program becomes recognized by the department, an A/D Director would need to be certified by a national accredited certification body. CCO is in the process of developing such a certification and expects to have it in place by this deadline. For more information on this topic, please visit CCO Certifications Assembly/Disassembly Director page.
Crane Certifiers also have a change to their process in becoming recognized by the department. This change goes into effect on September 5, 2025. Due to the detail, we have created a separate article about this topic. Please click here to access the article.
Lastly, it is important to note that the scope of the crane rule expanded to forklifts and other powered industrial trucks lifting a suspended load. By January 1, 2027, operators of forklifts lifting a suspended load will be required to be certified. Due to there not being any nationally accredited certification for straight mast forklifts at this time, CCO Certification recommends following the Crane Type Advisory Groups most similar determination. Click here to access this page.
Your Questions Answered
Can an employer rely on an individual’s qualification from a previous employer?
No. Employer qualifications are not portable.
Can an employer rely on a third-party qualification such as a CCO Certification?
Yes.
What is the difference between a third-party qualification and a third-party accredited certification?
Third-party accredited certifications are built to a job task analysis based on the ISO 17024 standards and are therefore legally defensible. Third-party qualifications are usually an indication that training has been completed.
Do crane operators have to be certified?
If they work in construction, yes.
Does an operator need both CCO certification and an employer evaluation, or is one sufficient?
Both are required. Operators must be certified, pass a substance abuse test, and be evaluated by their employer for knowledge and safe operation.
If I’m certified in another state, is it portable/recognized in Washington?
Yes, if the certification is from a nationally accredited certification body such as CCO.
Do Assembly/Disassembly Directors need to be certified in the construction industry in Washington State?
Yes, as of 1/1/2027 or 12 months after recognition of a nationally accredited assembly/disassembly director certification.
When will the certification be available through CCO for Assembly/Disassembly Directors?|
The certification will be available starting January 19, 2026.
Who can certify cranes in the construction industry in Washington State?
Only accredited crane certifiers may certify cranes in the State of Washington.